High Temperture Fused 95% Alumina Ceramic Roller for Glass Tempering Furnace

Product Description

High temperture fused 95% alumina ceramic roller for Glass Tempering Furnace

Product Description

Product Description of Ceramic Roller

Alumina ceramic roller is the most mature of the engineering ceramics, offering excellent electrical insulation properties together with high hardness and good wear resistance,but relatively low strength and fracture toughness.Alumina ceramics are generally white but may also be pink or ivory.The color is derived from either the sintering additives or impurities in the raw materials.

We have the most advanced automated shuttle kiln in the world, select high quality raw materials at home and abroad, and specializes in the production of various rollers with diameters of 16-200mm and lengths of 1000-5500mm, with an annual production capacity of 500000 pieces.

Characteristics of Ceramic roller

1. High hardness.
2. High heat resistance : Alumina ceramic has execellent themal stability,which means that it is widely used in areas where resistance to high temperatures is essential.
3. Good wear resistance : Alumina ceramic is the material of choice for alumina wear parts.
4. High electrical resistivity : Alumina is an electrically insulating material.
5. High corrosion resistance : It is insoluble in water and only slightly soluble in strong acid and alkaline solutions. Good chemical stability of alumina leads to high corrosion resistance.

Application of Ceramic roller

1.Ceramic shaft for aquatic animals equipment filter pump
2.Ceramic plunger for high pressure cleaner.
3.Wearlessness,resistant acid-base and high intensity ceramic assembly apply to petroleum ,chemical and chemical industry.
4.Wearlesness, corrosion resistance parts apply to precision machine.

Main Technical Specifications of Ceramic Roller

Item	RS-N98	RS-G98	RS-S95	RS-H80
Bulk Density g/cm3	2.7-2.8	2.8-3.0	2.5-2.7	2.3-2.5
Bibulous Rate %	5-8	3-6	9-10	9-11
Modulus of Rupture Mpa	50-55	70-80	40-50	45-55
High Temperature Modulus of Rupture Mpa	≥50	≥55	≥45	≥40
Maximum use temperature ºC	1350	1400	1250	≤1100
Thermal Shock Resistance	Good	Good	Good	Good
Raw Material Composition(Zr Al2O3) %	76-81	78-85	SIC 55%	75-80%
Specifications	Diameter φ16-200mm		Length 1000-5500mm
Straightness	Length X≤0.07%

Ceramic Roller Instructions

In order lo achieve the ideal use effect and extend the service life of ceramic roller. Please refer to the following instructions:
(1) The new ceramic roller before use, should be placed dry kiln top (60-8o ºC) more than 24 hours.
(2) After coating, the roller should be placed on the top of the kin for more than 72hous to dry;
(3) When replacing the roller, the roller should be quickly, quickly and rotated
(4) The thermal zone of roller, to avoid the low resistance to cold, should be placed in a veneer cushion on the scaffold, and keep the rotating state below 600 ºC;
(5) The surface of the roller is coated with small glaze particles, which will affect the thermal shock performance of the roller. It should be cleaned regularly
(6) Unqualified raw materials and fuels will corrode roller rods and be used carefully.

 

Product Application

Company Profile

RS Refractories Co., Ltd. is located in Henan, China. Our company has professional scientific and technical personnel and production team, and we have our own fully automated factories. For more than ten years, we have focused on the development and innovation of refractory materials and high-temperature furnace technology, and strive to provide customers with comprehensive, personalized and cost-effective services with high-quality products. Our products are widely used in electric power, metallurgy, petrochemical and other fields, and are exported to more than 70 countries and regions in the world such as Europe, America, Oceania, Southeast Asia, and the Middle East.
RS Refractories Co., Ltd. is a first-class supplier of refractory materials, we can provide you with the most advantageous quotations and products. Looking forward to be your partner!

Certifications

FAQ

Q1. Are you Manufacturer?
A: Yes, of course, our factory is in Xinmi,zhengzhou city,Henan province.
Q2. Can we visit your company?
A: Sure,welcome at any time,seeing is believing.

Q3. Do you accept OEM?
A: Yes, we can do OEM.

Q4. What's the MOQ of trial order?
A: No limit,We can offer the best suggestions and solutions according to your condition.

Q5. What are the payment terms?
A: Usually T/T,but L/C,Western Union etc are available for us.

Q6. How long is delivery time?
A: The delivery time will be determined according to the quantity of the order.

Q7. How are your products' quality?
A: The products will be strictly inspected before shipment, so the quality could be guaranteed.

Q8. How to solve the quality problems?
A: If the products are not confirmed to customer samples or have quality problems,our company will be responsible to make compensation for it.

Q9. What is the service life of your bricks?
A: The service life of different bricks is unlike.It also depends on your using condition and method.

Q10.How about your company's certification?
A: ISO9001 and Test Report,also we could apply other necessary certification.